Skip Navigation

新闻

  • 打印
  • 发表评论
  • | 共享

New, cheaper method for extracting clean water

Justine Davies

2009年7月28日 | EN

The system — known as 'M3' — can test whether fresh water can be extracted from almost any water source

De:Benutzer:Alex Anlicker

A mobile pilot system could make preliminary feasibility tests for desalination easier and cheaper for developing countries.

The system — known as 'M3' — can test whether fresh water can be extracted from almost any water source, say a team from the US-based University of California, Los Angeles (UCLA).

It harnesses a popular desalination technique known as reverse osmosis, a filtration process that forces water through a membrane, filtering out impurities.

Desalination is often costly but the M3 system can cut costs. Normally, a new static pilot plant must be constructed at every potential water source both to test water quality and to assess strategies for pretreating water.

Pretreatment is needed to remove impurities before they pollute the reverse osmosis membranes. These are costly to clean and replacing them means shutting down desalination plants, Nidal Hilal, director of the Centre for Clean Water Technologies at Nottingham University, United Kingdom, told SciDev.Net.

M3's flexible and portable nature means that a country interested in desalination could buy one system and use it to test all potential water sources, says UCLA team leader Yoram Cohen — saving time as well as money.

Deepak Kachru, of Aquatech International's Indian subsidiary, welcomes the system: "I am sure a mobile reverse osmosis system would be useful, especially for a system provider like Aquatech, which requires the same tests to be conducted at multiple sites."

Adel Sharif, director of the Centre for Osmosis Research and Applications at the University of Surrey, UK, told SciDev.Net: "Mobile pilot plants are absolutely useful in developing countries wanting to use reverse osmosis to test water quality."

"The M3 can fit into a standard cargo van with little effort," says Cohen. "It can be used for a wide-range of brackish [a mixture of seawater and fresh water] as well as sea water desalination. It produces up to about 5,000 gallons of water from seawater or up to about 8,000 gallons from brackish water. This means that the M3 can readily be used in emergency situations."

But Vincent Casey, technical support manager at international nongovernmental organisation WaterAid, says that the technology isn't feasible for communities WaterAid works with. He said WaterAid doesn't usually suggest reverse osmosis because it is costly, needs pre-treatment, spare parts are hard to get locally, and plants needs expertise for maintenance. Also, it doesn't usually address the issue of bringing water closer to the home.

Nevertheless, Cohen and his team "absolutely" hope that when the M3 becomes commercially available it will be affordable by developing countries. He adds: "Our main goal is to make the process smart so that it can be used even in areas where there is little expertise."

添加你的评论

这是您的网络:张贴您的评论,和别人分享您关于我们的任何文章的观点。

您需要注册后发表评论或者给作者发送评论的邮件。请登陆或注册。 登陆 或者 注册.

所有的评论都要接受审核,我们保留对评中包括 不适当/不适合的语言进行编辑的权利。科学与发展网络享有网站发布所有内容的版权。请查看使用条款了解详情。

只要适当标明来源与作者就可以免费复制科学与发展网络所有内容。更多详情请参见 发表评论.

返回 新闻
到达顶部